[ Erratum ]

Journal of the Korean Society for Precision Engineering - Vol. 34, No. 3, pp.227-227

ISSN: 1225-9071 (Print) 2287-8769 (Online)

Print publication date 01 Mar 2017

Erratum to: 레이저보조가공에서 NURBS 곡면 형상의 예열방법에 대한 연구

김은중¹ ; 이춘만¹^{, ✉}

1창원대학교 기계공학부

Erratum to: Study on the Preheating Method of NURBS Shaped Workpiece by Laser Assisted Machining

Eun-Jung Kim¹ ; Choon-Man Lee¹^{, ✉}

1School of Mechanical Engineering, Changwon National University

Correspondence to: ^✉ cmlee@changwon.ac.kr, Tel: +82-55-213-3622

한국정밀공학회지 제33권 제2호 pp. 101-107

출판일자: 2016년 2월 1일

제33권 제2호 101페이지에 표기된 게재판정일자를 아래와 같이 수정합니다.

J. Korean Soc. Precis. Eng., Vol. 33, No. 2 pp. 101-107

Published online: 1 February, 2016

The acceptance date of the above article has been corrected as follows.

The online version of the original can be found underhttps://doi.org/10.7736/KSPE.2016.33.2.101

Choon-Man Lee / #Corresponding Author

School of Mechanical Engineering, Changwon National University,Changwon-si, Gyeongsangnam-do, South Korea

E-mail: cmlee@changwon.ac.kr

수정 전	수정 후
Revised: 2015.1.27. Accepted: 2015.1.28.	Revised: 2016.1.27. Accepted: 2016.1.28.

Before correction	After correction
Revised: 2015.1.27. Accepted: 2015.1.28.	Revised: 2016.1.27. Accepted: 2016.1.28.