JKSPE
[ Erratum ]
Journal of the Korean Society for Precision Engineering - Vol. 34, No. 3, pp.231-231
ISSN: 1225-9071 (Print) 2287-8769 (Online)
Print publication date 01 Mar 2017
DOI: https://doi.org/10.7736/KSPE.2017.34.3.231

Erratum to: 롤투롤 와인딩 시스템에서 소재 특성을 고려한 반경 방향 응력에 대한 연구

김성용1 ; 이창우2,
1창원대학교 기계설계공학과
2창원대학교 기계공학부
Erratum to: Study on the Radial Stress Considering Mechanical Characteristics of Substrate in Wound Rolls
Seongyong Kim1 ; Changwoo Lee2,
1Department of Mechanical Design and Manufacturing, Changwon National University
2School of Mechanical Engineering, Changwon National University

Correspondence to: leecw@changwon.ac.kr, Tel: +82-55-213-3618

한국정밀공학회지 제33권 제2호 pp. 115-119

출판일자: 2016년 2월 1일

제33권 제2호 115페이지에 표기된 게재판정일자를 아래와 같이 수정합니다


J. Korean Soc. Precis. Eng., Vol. 33, No. 2 pp. 115-119

Published online: 1 February, 2016

The acceptance date of the above article has been corrected as follows.


The online version of the original can be found underhttps://doi.org/10.7736/KSPE.2016.33.2.115

Changwoo Lee / #Corresponding Author

School of Mechanical Engineering, Changwon National University,Changwon-si, Gyeongsangnam-do, South Korea

E-mail: leecw@changwon.ac.kr

수정 전 수정 후
Manuscript received: 2015.1.5.
Revised: 2015.1.26.
Accepted: 2015.1.26.
Manuscript received: 2016.1.5.
Revised: 2016.1.26.
Accepted: 2016.1.26.

Before correction After correction
Manuscript received: 2015.1.5.
Revised: 2015.1.26.
Accepted: 2015.1.26.
Manuscript received: 2016.1.5.
Revised: 2016.1.26.
Accepted: 2016.1.26.