Code of Ethics

Journal of the Korean Society for Precision Engineering - Vol. 34 , No. 3

[Paper List] [Go to Volume List] [Full Issue PDF]


[ Erratum ]
Journal of the Korean Society for Precision Engineering - Vol. 34, No. 3, pp. 225-225
Abbreviation: J. Korean Soc. Precis. Eng.
ISSN: 1225-9071 (Print) 2287-8769 (Online)
Print publication date 01 Mar 2017

DOI: https://doi.org/10.7736/KSPE.2017.34.3.225
Erratum to: 턴밀에서 트로코이드 치형 가공특성 평가에 관한 연구
이춘만¹^{, ✉} ; 안종욱¹

1School of Mechanical Engineering, Changwon National University
Erratum to: Study on the Evaluation of Machining Characteristics of Trochoidal Profile by Turn-Mill
Lee, Choon-Man¹^{, ✉} ; Lee, Changwoo¹
1창원대학교 기계공학부

Correspondence to : ^✉: cmlee@changwon.ac.kr, Tel: +82-55-213-6322

한국정밀공학회지 제33권 제2호 pp. 95-100

출판일자: 2016년 2월 1일

제33권 제2호 95페이지에 표기된 게재판정일자를 아래와 같이 수정합니다.

수정 전	수정 후
Accepted: 2015.1.26.	Accepted: 2016.1.26.

J. Korean Soc. Precis. Eng., Vol. 33, No. 2 pp. 95-100

Published online: 1 February, 2016

The acceptance date of the above article has been corrected as follows.

Before correction	After correction
Accepted: 2015.1.26.	Accepted: 2016.1.26.

The online version of the original can be found underhttps://doi.org/10.7736/KSPE.2016.33.2.95

Choon-Man Lee / #Corresponding Author

School of Mechanical Engineering, Changwon National University,Changwon-si, Gyeongsangnam-do, South Korea

E-mail: cmlee@changwon.ac.kr

사단법인 한국정밀공학회
(04508) 서울시 중구 중림로 50-1, 12층(만리동 SKY1004빌딩)
SKY 1004 Bldg. 12F, 50-1, Jungnim-ro, Jung-gu, Seoul, Republic of Korea
TEL +82-2-518-2928 l Fax +82-2-518-2937 l E-mail paper@kspe.or.kr
ⓒ Copyright 2001 by KSPE. All Rights Reserved