Code of Ethics

Journal of the Korean Society for Precision Engineering - Vol. 36 , No. 4

[Go to Volume List] [Full Issue PDF]

1. p.323 Domestic Recent Works on Robotic System for Safety of Nuclear Power Plants

Sung Uk Lee, Youngsoo Choi, Kyung-min Jeong,이성욱, 최영수, 정경민
DOI: https://doi.org/10.7736/KSPE.2019.36.4.323

2. p.331 Research Trends on Disaster Response Robots

Maolin Jin, Kap-Ho Seo, Jin-Ho Suh,김무림, 서갑호, 서진호
DOI: https://doi.org/10.7736/KSPE.2019.36.4.331

3. p.339 Study on Mobility of Planetary Rovers and the Development of a Lunar Rover Prototype with Minimized Redundancy of Actuators

Mingyo Seo, Woosub Lee,서민교, 이우섭
DOI: https://doi.org/10.7736/KSPE.2019.36.4.339

4. p.349 Touch Screen Based Assistance Technique for Underwater Manipulation of Cable Burying ROV

Gun Rae Cho, Geonhui Ki, Ji-Hong Li,조건래, 기건희, 이계홍
DOI: https://doi.org/10.7736/KSPE.2019.36.4.349

5. p.363 Planarization Modeling Based on Contact Mode Between Pad Asperity and Oxide Pattern During CMP

Hyunjin Kim, Byeongjun Pak, Seonho Jeong, Dasol Lee, Haedo Jeong,김현진, 박병준, 정선호, 이다솔, 정해도
DOI: https://doi.org/10.7736/KSPE.2019.36.4.363

6. p.373 ACE-Knee, a Novel Modularized Knee Exoskeleton: Concept Design and Analysis of Design Requirements by Knee Motion Analysis

Man Bok Hong, Gwang Tae Kim, Yeo Hun Yoon,홍만복, 김광태, 윤여훈
DOI: https://doi.org/10.7736/KSPE.2019.36.4.373

7. p.383 An Automated Tracking System of Fine Dust Generating Spot for Building Dismantlement Sites

Seolha Kim, Minji Kim, Heeyun Jung, Baeksuk Chu,김설하, 김민지, 정희윤, 주백석
DOI: https://doi.org/10.7736/KSPE.2019.36.4.383

8. p.391 A Hybrid Learning-based Predictive Process Planning Mechanism for Cyber-Physical Production Systems

Seung-Jun Shin,신승준
DOI: https://doi.org/10.7736/KSPE.2019.36.4.391

9. p.401 Prediction of Low-Cycle Fatigue Life of In738LC Using Plastic Strain Energy Density

Sung Uk Wee, Chang Sung Seok, Jae Mean Koo, Jeong Min Lee,위성욱, 석창성, 구재민, 이정민
DOI: https://doi.org/10.7736/KSPE.2019.36.4.401

10. p.407 Tolerance Analyses of Case/Stator for the Assembly and Remanufacturing of Motor

Jin Jae Kim, You Seok Kim, Tae Seog Hwang, Young Suk Kim,김진재, 김유석, 황태석, 김영석
DOI: https://doi.org/10.7736/KSPE.2019.36.4.407

11. p.413 Fabrication of Anisotropically Oleophobic Surface with Inverse-Tapered Structure Using Micromolding in Capillaries and Microtransfer Molding

Ki Yeon Hong, Dong-Ki Lee, Sungdong Kim, Young Hak Cho,홍기연, 이동기, 김성동, 조영학
DOI: https://doi.org/10.7736/KSPE.2019.36.4.413

12. p.419 An Assistive Control Strategy Using Arm Swing Information for 1DoF Hip Exoskeleton for Hemiplegic Gait Rehabilitation

Wooseok Seo, Joon Ho Kwon, Yeonho Ko, Daehie Hong,서우석, 권준호, 고연호, 홍대희
DOI: https://doi.org/10.7736/KSPE.2019.36.4.419

13. p.425 One-Step 3D Microfabrication of High-Resolution, High-Aspect-Ratio Micropillar Arrays for Soft Artificial Axons by Using Light-Induced Self-Focusing Photopolymerization

Seok Kim,김석
DOI: https://doi.org/10.7736/KSPE.2019.36.4.425

14. p.431 Case Study of Different Additive Manufacturing (AM) Processes from Environmental Impact Assessment

JuYoun Kwon, Namhun Kim, Jungmok Ma,권주연, 김남훈, 마정목
DOI: https://doi.org/10.7736/KSPE.2019.36.4.431

사단법인 한국정밀공학회
(04508) 서울시 중구 중림로 50-1, 12층(만리동 SKY1004빌딩)
SKY 1004 Bldg. 12F, 50-1, Jungnim-ro, Jung-gu, Seoul, Republic of Korea
TEL +82-2-518-2928 l Fax +82-2-518-2937 l E-mail paper@kspe.or.kr
ⓒ Copyright 2001 by KSPE. All Rights Reserved