Code of Ethics

Journal of the Korean Society for Precision Engineering - Vol. 36 , No. 3

[Go to Volume List] [Full Issue PDF]

1. p.219 Real-Time Curvature Measurement Sensor for Active Steering of Railroad Vehicles

Dahoon Ahn, Hyunmoo Hur, Yujeong Shin,안다훈, 허현무, 신유정
DOI: https://doi.org/10.7736/KSPE.2019.36.3.219

2. p.225 Characteristic Analysis of Electronic Connector Grasp and Assembly for Design Grippers

Chang Soo Han, Boyoung An, Hyeon Guk Kim, In Hyuk Baek, Soon Woong Hwang, Kyoo Sik Shin, Jun Hyung Heo,한창수, 안보영, 김현국, 백인혁, 황순웅, 신규식, 허준형
DOI: https://doi.org/10.7736/KSPE.2019.36.3.225

3. p.233 Estimation of Vertical Displacement based on Inertial Sensor Signals Combined with Joint Constraint

Jung Keun Lee,이정근
DOI: https://doi.org/10.7736/KSPE.2019.36.3.233

4. p.239 Prediction of Smart Greenhouse Temperature-Humidity Based on Multi-Dimensional LSTMs

Young Eun Song, Aekyung Moon, Su-Yong An, Hoeryong Jung,송영은, 문애경, 안수용, 정회룡
DOI: https://doi.org/10.7736/KSPE.2019.36.3.239

5. p.247 Topology and Multi-Objective Structural Optimization of Frame Structure for a Mechanical Press with Capacity of 300 Ton

Han Sol Kim, Seok Il Kim,김한솔, 김석일
DOI: https://doi.org/10.7736/KSPE.2019.36.3.247

6. p.255 The Study on the Mine Protective Structural Design of Wheeled Armored Vehicle Body

Chan Young Park, Kyoung Hoon Lee,박찬영, 이경훈
DOI: https://doi.org/10.7736/KSPE.2019.36.3.255

7. p.263 A Comparative Study on Fracture Property of Aluminum Foam DCB and TDCB Specimens for Type of Mode III on Thickness

Jung Ho Lee, Sung Ki Lyu, Jae Ung Cho,이정호, 류성기, 조재웅
DOI: https://doi.org/10.7736/KSPE.2019.36.3.263

8. p.271 Low Cycle Fatigue Characteristics of a Ni-Based Single Crystal Superalloy CMSX-4 at Elevated Temperature

Jae Gu Choi, Chang-Sung Seok, Sung Uk Wee, Eui-Suck Chung, Byoung-Gwan Yun, Suk-Hwan Kwon,최재구, 석창성, 위성욱, 정의석, 윤병관, 권석환
DOI: https://doi.org/10.7736/KSPE.2019.36.3.271

9. p.281 Development of an Automated Electric Snowplow for Vehicles by Using a Sprocket and Chain for Improving Durability

Kee Joo Kim, Si Tae Won,김기주, 원시태
DOI: https://doi.org/10.7736/KSPE.2019.36.3.281

10. p.287 Fabrication of Microchannel with Parallelogram Cross-Section Using Si Anisotropic Wet Etching and Self-Alignment

Joo Yong Kwon, Dong-Ki Lee, Young Hak Cho,권주용, 이동기, 조영학
DOI: https://doi.org/10.7736/KSPE.2019.36.3.287

11. p.293 Study on the Reliability of Smartphone-Based Measurements of Leg Segment and Joint Angles During Gait

Daehee Lee, Seulki Han,이대희, 한슬기
DOI: https://doi.org/10.7736/KSPE.2019.36.3.293

12. p.301 A Study of Orthognathic Surgical Splints Development Using 3D Convergence Technology

Min-Uk Kim, Yun-Ho Kim, Young-Suk Kim,김민욱, 김윤호, 김영석
DOI: https://doi.org/10.7736/KSPE.2019.36.3.301

13. p.311 Study on Optimal Altitude and Economic, Stability Review of 10 kW Class Horizontal Wind Turbine

Da Han Han, Shin You Kang, Jeong Hwan Kim,한다한, 강신유, 김정환
DOI: https://doi.org/10.7736/KSPE.2019.36.3.311

사단법인 한국정밀공학회
(04508) 서울시 중구 중림로 50-1, 12층(만리동 SKY1004빌딩)
SKY 1004 Bldg. 12F, 50-1, Jungnim-ro, Jung-gu, Seoul, Republic of Korea
TEL +82-2-518-2928 l Fax +82-2-518-2937 l E-mail paper@kspe.or.kr
ⓒ Copyright 2001 by KSPE. All Rights Reserved