Code of Ethics

Journal of the Korean Society for Precision Engineering - Vol. 35 , No. 7

[Go to Volume List] [Full Issue PDF]

1. p.651 Comparison of Direct and Indirect Measurement of Creep Uncertainty in the Calibration of Force Measuring Devices

Manrusces Enot, Jin-seok Jang, Yon-Kyu Park,마르세스, 장진석, 박연규
DOI: https://doi.org/10.7736/KSPE.2018.35.7.651

2. p.657 Inspection of the Epoxy-Bushing in Switchgear Using Ultrasonic Immersion System

Yong Sang Cho, Doo Song Gil, Su Ji Han, Jin Hyuk Lee,조용상, 길두송, 한수지, 이진혁
DOI: https://doi.org/10.7736/KSPE.2018.35.7.657

3. p.663 Development of Automatic System to Discharge Sludge in Oil Separator of Marine Engine

Chan Hoon Ahn, Man Gi Kim, Jun Choi,안찬훈, 김만기, 최준
DOI: https://doi.org/10.7736/KSPE.2018.35.7.663

4. p.669 Development of Robot’s Vision Control Scheme Using the Data Moving Method for the Tracking of Moving Target

Jae Myung Kim, Jae Kyung Son, Wan Shik Jang,김재명, 손재경, 장완식
DOI: https://doi.org/10.7736/KSPE.2018.35.7.669

5. p.681 A Study on the Vibration Reduction of Turbine Rotor through Advanced Flexible Packing Rings

Hyeon Jong Kim, Hyo Seo Kwak, Han Saem Sung, Chang Ryeol Lee, Chul Kim,김현종, 곽효서, 성한샘, 이창렬, 김철
DOI: https://doi.org/10.7736/KSPE.2018.35.7.681

6. p.689 A Study on the Method for the Temperature Analysis of Side Wall for the Durability of Run-Flat Tires

Hyung Jin Kim, Jin Hwan Lee, Seong Rae Kim, Ki Deug Sung, Won Byoung Bae,김형진, 이진환, 김성래, 성기득, 배원병
DOI: https://doi.org/10.7736/KSPE.2018.35.7.689

7. p.695 Lightweight Design of the Stub Axle Using Topology Optimization

Jinsu Kim, Hong Seong Roh, Yeonjoo Min, Sung-Ho Hur, In Gwun Jang,김진수, 노홍승, 민연주, 허성호, 장인권
DOI: https://doi.org/10.7736/KSPE.2018.35.7.695

8. p.701 Degradation Progression of Polyurethane Hydraulic Reciprocating Seal

Junho Bae, Koo-Hyun Chung,배준호, 정구현
DOI: https://doi.org/10.7736/KSPE.2018.35.7.701

9. p.707 A Study on the Effect of Restriking Process for the Stampings of HSS Sheet

Rongzhen Zheng, Hyun Bo Shim, 심현보
DOI: https://doi.org/10.7736/KSPE.2018.35.7.707

10. p.715 Design of Tip Clearance in the D.D.I. Process to Manufacture Pressure Vessel

Hyo Seo Kwak, Gun Young Park, Chul Kim,곽효서, 박건영, 김철
DOI: https://doi.org/10.7736/KSPE.2018.35.7.715

11. p.721 Analysis in the Change of Paraspinal Muscle Activities and Adjacent Disc Degeneration according to the Segmental Fusion

Hae Won Choi, Young Eun Kim,최혜원, 김영은
DOI: https://doi.org/10.7736/KSPE.2018.35.7.721

12. p.729 Shaping of Micro Scale Features on Metallic Surfaces through the High-Speed Impact of Laser Accelerated Flyers

Dae Cheol Choi, Hong Seok Kim,최대철, 김홍석
DOI: https://doi.org/10.7736/KSPE.2018.35.7.729

사단법인 한국정밀공학회
(04508) 서울시 중구 중림로 50-1, 12층(만리동 SKY1004빌딩)
SKY 1004 Bldg. 12F, 50-1, Jungnim-ro, Jung-gu, Seoul, Republic of Korea
TEL +82-2-518-2928 l Fax +82-2-518-2937 l E-mail paper@kspe.or.kr
ⓒ Copyright 2001 by KSPE. All Rights Reserved