Code of Ethics

Journal of the Korean Society for Precision Engineering - Vol. 35 , No. 6

1. p.571 A Study on the Design of Rear Wheel Drive Reducer for Electric Vehicle

Myeong Ho Kim, Zhen Qin, Ki Hun Lee, Qi Zhang, Sung Ki Lyu,김명호, 진진, 이기훈, 장기, 류성기
DOI: https://doi.org/10.7736/KSPE.2018.35.6.571

2. p.579 Improvement of In-Mold Type PAB Door Sink Marks Using Mucell Process

Cheon-Soo Park, Dong-Won Jung,박천수, 정동원
DOI: https://doi.org/10.7736/KSPE.2018.35.6.579

3. p.585 A Study on the Foundation Design of Large Machining Center for Highly Precision

Seonghwa Cho, Changwoo Lee,조성화, 이창우
DOI: https://doi.org/10.7736/KSPE.2018.35.6.585

4. p.591 An Experimental Study on the Dynamic Response for an Operating Rotor System under the Sinusoidal Exciting Force

Chae Sil Kim, Jae Hoon Lee,김재실, 이재훈
DOI: https://doi.org/10.7736/KSPE.2018.35.6.591

5. p.597 A Study on the Machining Characteristics of a Turning-Center by Laser Assisted Machining

Choon-Man Lee, Eun Jung Kim,이춘만, 김은중
DOI: https://doi.org/10.7736/KSPE.2018.35.6.597

6. p.603 A Study on the Effect of Gas Flow Rate and Power in Plasma Assisted Machining

Choon-Man Lee, Young Hun Lee,이춘만, 이영훈
DOI: https://doi.org/10.7736/KSPE.2018.35.6.603

7. p.609 Study on Finite Element Modeling Method for Cylindrical Composite Lattice Structures with Hexagonal Cell

Jae Moon Im, Kwang Bok Shin, Sang Woo Lee,임재문, 신광복, 이상우
DOI: https://doi.org/10.7736/KSPE.2018.35.6.609

8. p.615 Block Shear Strength Estimation of STS304L Stainless Steel Fillet-Welded Connection with Base Metal Fracture

Hoo Chang Lee, Bo Kyung Hwang, Tae Soo Kim,이후창, 황보경, 김태수
DOI: https://doi.org/10.7736/KSPE.2018.35.6.615

9. p.623 Interim Check and Compensation of Geometric Errors to Improve Volumetric Error of Machine Tools

Seung-Han Yang, Hoon-Hee Lee, Kwang-Il Lee,양승한, 이훈희, 이광일
DOI: https://doi.org/10.7736/KSPE.2018.35.6.623

10. p.629 A Study of Droplet Transmissivity Change by Characteristic of Mesh

Jinyoung Park, Woonbong Hwang,박진영, 황운봉
DOI: https://doi.org/10.7736/KSPE.2018.35.6.629

11. p.635 Effects of the Liquid Surface Tension on the Ejected Droplet Volume in a Pneumatic Printing System

Sangmin Lee, In Ho Choi, Joonwon Kim,이상민, 최인호, 김준원
DOI: https://doi.org/10.7736/KSPE.2018.35.6.635

12. p.641 Analysis of Underfill Process on Micro-Pitch Flip-Chip by Epoxy Filling Rate

Ki Beom Ham, Jungo Son, Hyun-Ja Im, Yong-Jai Park,함기범, 손정오, 임현자, 박용재
DOI: https://doi.org/10.7736/KSPE.2018.35.6.641

사단법인 한국정밀공학회
(04508) 서울시 중구 중림로 50-1, 12층(만리동 SKY1004빌딩)
SKY 1004 Bldg. 12F, 50-1, Jungnim-ro, Jung-gu, Seoul, Republic of Korea
TEL +82-2-518-2928 l Fax +82-2-518-2937 l E-mail paper@kspe.or.kr
ⓒ Copyright 2001 by KSPE. All Rights Reserved