Code of Ethics

Journal of the Korean Society for Precision Engineering - Vol. 34 , No. 2

1. p.77 Drawing Process Design and Mechanical Properties Control for High Strengthening of CP Titanium

Seong Woo Choi, Chan Hee Park, Sang Won Lee, Jong Taek Yeom, Jae Keun Hong,최성우, 박찬희, 이상원, 염종택, 홍재근
DOI: https://doi.org/10.7736/KSPE.2017.34.2.77

2. p.83 Design of a Multi-Step Warm Heading Process for Subminiature Screws

Yeon Hui Jang, Jin Hwan Jeong, Myung Guen Jang, Jae-Keun Hong, Jong-Bong Kim,장연희, 정진환, 장명근, 홍재근, 김종봉
DOI: https://doi.org/10.7736/KSPE.2017.34.2.83

3. p.89 An Investigation of Thread Rolling Characteristics of Titanium Micro-Screws according to Die Design Parameters

Ji Eun Lee, Jong-Bong Kim, Keun Park, 이지은, 김종봉, 박근
DOI: https://doi.org/10.7736/KSPE.2017.34.2.89

4. p.95 Evaluation on Effect of Hole Machining for Application of M1.0 Subminiature Screw to CFRP Laminate Using FEM

Dae Young Kim, Hee Seong Kim, Ji Hoon Kim,김대영, 김희성, 김지훈
DOI: https://doi.org/10.7736/KSPE.2017.34.2.95

5. p.101 Effect of Slurry Flow in Spray Slurry Nozzle System on Cu CMP

Da Sol Lee, Seon Ho Jeong, Jong Woo Lee, Jin Yeop Jeong, Hae Do Jeong, 이다솔, 정선호, 이종우, 정진엽, 정해도
DOI: https://doi.org/10.7736/KSPE.2017.34.2.101

6. p.107 3D Surface and Thickness Profile Measurements of Si Wafers by Using 6 DOF Stitching NIR Low Coherence Scanning Interferometry

Hyo Mi Park, Mun Sung Choi, Ki-Nam Joo,박효미, 최문성, 주기남
DOI: https://doi.org/10.7736/KSPE.2017.34.2.107

7. p.115 Design and Evaluation of the Control Performance of a Compliant Arm Support

Sang-Hun Kim, Useok Jeong, Daegeun Park, Inwook Koo, Kyu-Jin Cho,김상훈, 정우석, 박대근, 구인욱, 조규진
DOI: https://doi.org/10.7736/KSPE.2017.34.2.115

8. p.125 The Adaptive Backstepping Controller of RBF Neural Network Which is Designed on the Basis of the Error

Hyun Woo Kim, Yook Hyun Yoon, Jin Han Jeong, Jahng Hyon Park,김현우, 윤육현, 정진한, 박장현
DOI: https://doi.org/10.7736/KSPE.2017.34.2.125

9. p.133 Heuristic Algorithm for Performance Improvement of Non-Communication Inverter Type Refrigerator

Seon Gyu Min, Hyung Jun Kim, Ju Kyoung Lee, Jun Hyeon Hwang, Suk Lee,민선규, 김형준, 이주경, 황준현, 이석
DOI: https://doi.org/10.7736/KSPE.2017.34.2.133

10. p.139 A Study on the Development of the Split-Type Carbon Composite Bicycle Frames

Chan Gon Park, Young Choi, Bong Yong Kang, Eun Gyu Kim,박찬곤, 최영, 강봉용, 김은규
DOI: https://doi.org/10.7736/KSPE.2017.34.2.139

11. p.145 Simulation Study on the Design of Air Brake Valve for Automobile Applications

Dong Woo Lee, Min-Seung Jun, Jung Il Song,이동우, 전민승, 송정일
DOI: https://doi.org/10.7736/KSPE.2017.34.2.145

12. p.151 The Solution of Peening Residual Stress by Angled Impact of Multi Elliptical Shot Ball Based on Finite Element Analysis

Taehyung Kim,김태형
DOI: https://doi.org/10.7736/KSPE.2017.34.2.151

사단법인 한국정밀공학회
(04508) 서울시 중구 중림로 50-1, 12층(만리동 SKY1004빌딩)
SKY 1004 Bldg. 12F, 50-1, Jungnim-ro, Jung-gu, Seoul, Republic of Korea
TEL +82-2-518-2928 l Fax +82-2-518-2937 l E-mail paper@kspe.or.kr
ⓒ Copyright 2001 by KSPE. All Rights Reserved