Code of Ethics

Journal of the Korean Society for Precision Engineering - Vol. 34 , No. 3

1. p.161 A Study on Improved Drill Shape for Efficient Drilling of Inconel 718 Using the Design of Experiment

Do Hyeog Kim, Ki Bum Park, Young Tae Cho, Yoon Gyo Jung,김도혁, 박기범, 조영태, 정윤교
DOI: https://doi.org/10.7736/KSPE.2017.34.3.161

2. p.167 The Effect of Tension and Drop Height on Contact Angle of Droplet on Flexible Substrate in Roll-to-Roll Systems

Dongguk Kim, Changwoo Lee,김동국, 이창우
DOI: https://doi.org/10.7736/KSPE.2017.34.3.167

3. p.173 A Study on the Analysis and Design for a Ball Screw Whirling Machine

Choon-Man Lee, Sung-Ho Moon, Eun-Jung Kim,이춘만, 문성호, 김은중
DOI: https://doi.org/10.7736/KSPE.2017.34.3.173

4. p.179 A Study on the Development of Overload Detecting Pad for Low Speed WIM System

Choon-Man Lee, Young-Ho Choi, Eun-Jung Kim,이춘만, 최영호, 김은중
DOI: https://doi.org/10.7736/KSPE.2017.34.3.179

5. p.185 Experimental Characterization of Turning Process of Titanium Alloy Using Cryogenic Cooling and Nanofluid Minimum Quantity Lubrication

Jin Woo Kim, Jung Sub Kim, Sang Won Lee,김진우, 김정섭, 이상원
DOI: https://doi.org/10.7736/KSPE.2017.34.3.185

6. p.191 Correction in the Measurement Error of Water Depth Caused by the Effect of Seafloor Slope on Peak Timing of Airborne LiDAR Waveforms

Ki Hyeon Sim, Jae Heun Woo, Jae Yong Lee, Jae Wan Kim,심기현, 우제흔, 이재용, 김재완
DOI: https://doi.org/10.7736/KSPE.2017.34.3.191

7. p.199 Focused-Infrared-Light Assisted Roll-to-Roll Hot Embossing

Jeongdai Jo, Wooseop Kim, Kwang-Young Kim, Young-Man Choi,조정대, 김우섭, 김광영, 최영만
DOI: https://doi.org/10.7736/KSPE.2017.34.3.199

8. p.205 Evaluation of Critical Speed for Active Steering Bogie Prototype

Hyun Moo Hur, Joon-Hyuk Park,허현무, 박준혁
DOI: https://doi.org/10.7736/KSPE.2017.34.3.205

9. p.211 Dynamic Characteristic Evaluation of the Bucket Elevator Chain Pin and Plate

Chang Uk Kim, Dong Woo Lee, Seung Bin Park, Jung Il Song,김창욱, 이동우, 박승빈, 송정일
DOI: https://doi.org/10.7736/KSPE.2017.34.3.211

10. p.217 Fundamental Study on the Development of a New Incremental Roll Forming Process for Structural Pipe Manufacturing

Jong Youn Son, Hee Seok Yoon, Won Kyun Park, Do Sik Shim,손종윤, 윤희석, 박원균, 심도식
DOI: https://doi.org/10.7736/KSPE.2017.34.3.217

11. p.225 Erratum to: Study on the Evaluation of Machining Characteristics of Trochoidal Profile by Turn-Mill

Lee, Choon-Man, Lee, Changwoo,이춘만, 안종욱
DOI: https://doi.org/10.7736/KSPE.2017.34.3.225

12. p.227 Erratum to: Study on the Preheating Method of NURBS Shaped Workpiece by Laser Assisted Machining

Eun-Jung Kim, Choon-Man Lee,김은중, 이춘만
DOI: https://doi.org/10.7736/KSPE.2017.34.3.227

13. p.229 Erratum to: Study on the Transmission Error Prediction for a Spur Gear Pair

Qi Zhang, Jing Zhang, Zhong Gang Zhu, Zhen Rong Wang, Zhe-zhu Xu, Sung Ki Lyu,장기, 장정, 주충강, 왕진영, 허철수, 류성기
DOI: https://doi.org/10.7736/KSPE.2017.34.3.229

14. p.231 Erratum to: Study on the Radial Stress Considering Mechanical Characteristics of Substrate in Wound Rolls

Seongyong Kim, Changwoo Lee,김성용, 이창우
DOI: https://doi.org/10.7736/KSPE.2017.34.3.231

사단법인 한국정밀공학회
(04508) 서울시 중구 중림로 50-1, 12층(만리동 SKY1004빌딩)
SKY 1004 Bldg. 12F, 50-1, Jungnim-ro, Jung-gu, Seoul, Republic of Korea
TEL +82-2-518-2928 l Fax +82-2-518-2937 l E-mail paper@kspe.or.kr
ⓒ Copyright 2001 by KSPE. All Rights Reserved