Code of Ethics

Journal of the Korean Society for Precision Engineering - Vol. 34 , No. 12

1. p.847 Observation for Crack Generatdion of Wheel Tread Regarding to Brake Cycle

Seok Jin Kwon, Jung Won Seo, Hun Kyu Jun, Dong Hyung Lee,권석진, 서정원, 전현규, 이동형
DOI: https://doi.org/10.7736/KSPE.2017.34.12.847

2. p.853 An Experimental Study on the Re-Useable Self-Locking Nut for High-Speed Rail Vehicle Bogie and Car Body Connection Device

Chan Woo Lee,이찬우
DOI: https://doi.org/10.7736/KSPE.2017.34.12.853

3. p.861 Evaluation of Fatigue and Fracture Characteristics of High-Speed Rail Material

Jung Won Seo, Seok Jin Kwon, Hyun Kyu Jun, Dong Hyeong Lee,서정원, 권석진, 전현규, 이동형
DOI: https://doi.org/10.7736/KSPE.2017.34.12.861

4. p.867 A Study on the Accelerated Life Test of Axle Bearing for Railway Vehicles Using Rotational Speed-Temperature Variation Curve

Jae Won Lee, Young Sam Ham, Chang Sung Seok,이재원, 함영삼, 석창성
DOI: https://doi.org/10.7736/KSPE.2017.34.12.867

5. p.873 Analysis of the Braking Performance Test Results between Mechanical and Electronic Inertia

Min Soo Kim, Don Bum Choi, Seok Jin Kwon,김민수, 최돈범, 권석진
DOI: https://doi.org/10.7736/KSPE.2017.34.12.873

6. p.881 Dynamic Analysis of the Influence of the Track Irregularity on the Running Performance of the Railway Vehicle

Bu Byoung Kang,강부병
DOI: https://doi.org/10.7736/KSPE.2017.34.12.881

7. p.889 Development of Magnetostrictive Control Rod Position Indicator

Eun-Ju Yoo, Young-Woo Park, Myounggyu Noh,유은주, 박영우, 노명규
DOI: https://doi.org/10.7736/KSPE.2017.34.12.889

8. p.897 Input-Shaping Methods for a Linear Motor Motion Stage with a Passive RFC(Reaction Force Compensation) Mechanism

Kang Jo Hwang, Jae Seong Jeong, Hyeong-Joon Ahn,황강조, 정재성, 안형준
DOI: https://doi.org/10.7736/KSPE.2017.34.12.897

9. p.903 Application of LOM for Freeform Architecture

Sangyeol Jeong, Joonhyuk Sim, Hakmin Kim, Dongbin Shin, Daehie Hong,정상열, 심준혁, 김학민, 신동빈, 홍대희
DOI: https://doi.org/10.7736/KSPE.2017.34.12.903

10. p.911 Evaluation of High-Temperature Oxidation, Corrosion and Wear Resistance of Top-Coated Grate Bar

Hee Keun Cho, Jin Hyo Ahn,조희근, 안진효
DOI: https://doi.org/10.7736/KSPE.2017.34.12.911

11. p.917 A Study on the Design Model of Passive Tunable Damped Boring Bar

Jun-Hee Hong, Yang-Yang Guo, Doo-Sang Song,홍준희, 곽양양, 송두상
DOI: https://doi.org/10.7736/KSPE.2017.34.12.917

12. p.927 Development of a Test Equipment for Diaphragm Deflection Using a PZT Actuator

Dae Jhoong Yoon, Jung Hwan Ahn,윤대중, 안중환
DOI: https://doi.org/10.7736/KSPE.2017.34.12.927

13. p.933 Safety Evaluation of Lumbar Stand-Alone Cage

Mun-Hwan Lee, Sang Bok Kim, Eun-Yi Jeon, Minjung Kim, Eun Young Kim,이문환, 김상복, 전은이, 김민정, 김은영
DOI: https://doi.org/10.7736/KSPE.2017.34.12.933

14. p.939 A Study on the Effects of the Corrugated Angle on Low Velocity Impact Characteristics of the Lightweight Sandwich Plate with Corrugated Cores Produced by FDM Process

Yong Hun Jang, Dong-Gyu Ahn, Bo Sung Shin,장용훈, 안동규, 신보성
DOI: https://doi.org/10.7736/KSPE.2017.34.12.939

사단법인 한국정밀공학회
(04508) 서울시 중구 중림로 50-1, 12층(만리동 SKY1004빌딩)
SKY 1004 Bldg. 12F, 50-1, Jungnim-ro, Jung-gu, Seoul, Republic of Korea
TEL +82-2-518-2928 l Fax +82-2-518-2937 l E-mail paper@kspe.or.kr
ⓒ Copyright 2001 by KSPE. All Rights Reserved