HOME > Browse Articles > Archive

Code of Ethics

Journal of the Korean Society for Precision Engineering - Vol. 37 , No. 8

1. p.567 Planarization Modeling for Device Pattern with Geometric Characteristics of Pad Asperity

Somin Shin, Dasol Lee, Seonho Jeong, Kyeongwoo Jeong, Jinuk Choi, Haedo Jeong,신소민, 이다솔, 정선호, 정경우, 최진욱, 정해도
DOI: https://doi.org/10.7736/JKSPE.020.023

2. p.579 Development of Lower-Limb Wearable Robot with Single Acting Hydraulic Telescopic Cylinder Electro Hydrostatic Actuator (SAT-EHA) for Handling of Heavy Loads

Dong-Hyun Jeong, Do-Yeon Kang, Ji-Seok Lee,정동현, 강도연, 이지석
DOI: https://doi.org/10.7736/JKSPE.019.163

3. p.587 Study on Performance Improvement at Flexure Piezo Stage Using Feedforward and Snap

Taehwa Hong, Jinho Lee, Hyoyoung Kim, Kihyun Kim,홍태화, 이진호, 김효영, 김기현
DOI: https://doi.org/10.7736/JKSPE.020.017

4. p.595 Influence of the Deformation on the Microstructure and Mechanical Properties of TBF Steel

Nguyen Duong Nam, Tran Phap Dong, Tran The Nam, Nguyen Hong Hai, Pham Mai Khanh
DOI: https://doi.org/10.7736/JKSPE.019.054

5. p.601 Fatigue Life Analysis of T-Type Fillet Welded Joints Using an Effective Notch Stress Method

Minhyeok Heo, Changwan Han, Hanjong Kim, Seung-bin Jung, Seonghun Park,허민혁, 한창완, 김한종, 정승빈, 박성훈
DOI: https://doi.org/10.7736/JKSPE.020.010

6. p.607 Fatigue Life Analysis and Experimental Study of the Input Shaft of 6-Speed Automatic Transmission

Jianhua Lv, Xing Zhong, Rui Zhou, Zhen Qin, Qi Zhang, Sungki Lyu,려건화, 종흥, 주서, 진진, 장기, 류성기
DOI: https://doi.org/10.7736/JKSPE.020.011

7. p.615 Effects of Bearing Locations on the Characteristics of a Spindle System Supported by Tapered Roller Bearings

Van-Canh Tong, Jooho Hwang, Seong-Wook Hong,통반칸, 황주호, 홍성욱
DOI: https://doi.org/10.7736/JKSPE.020.018

8. p.625 Analysis on Deformation Behavior and Restructuring of Additive Manufactured Metal Lattice-Structures under Compressive Loading Condition

Jin Qing Ye, Dong Seok Kang, Si Mo Yeon, Yong Son, Sang Hu Park,진칭예, 강동석, 연시모, 손용, 박상후
DOI: https://doi.org/10.7736/JKSPE.020.015

9. p.633 Development of a System to Retrieve Manufacturing Conditions to Support 3D Printing-Based Part Maintenance

Inhyeok Lee, Moohyun Cha, Daejung Kim, Duhwan Mun,이인혁, 차무현, 김대중, 문두환
DOI: https://doi.org/10.7736/JKSPE.020.021

사단법인 한국정밀공학회
(04508) 서울시 중구 중림로 50-1, 12층(만리동 SKY1004빌딩)
SKY 1004 Bldg. 12F, 50-1, Jungnim-ro, Jung-gu, Seoul, Republic of Korea
TEL +82-2-518-2928 l Fax +82-2-518-2937 l E-mail paper@kspe.or.kr
ⓒ Copyright 2001 by KSPE. All Rights Reserved