Code of Ethics

Journal of the Korean Society for Precision Engineering - Vol. 40 , No. 4

1. p.261 Study on the Effect of MQL Spraying Condition on the Machinability in Titanium Cryogenic Machining

Dong Min Kim, Heung Bum Park, Byung-Gook Kim, Hoon-Hee Lee, Young Ha Hwang, Ki Hyuk Kim, In Su Shin, Do Young Kim,김동민, 박흥범, 김병국, 이훈희, 황영하, 김기혁, 신인수, 김도영
DOI: https://doi.org/10.7736/JKSPE.022.144

2. p.269 Effect on Bacterial Culture on Ceramic Surfaces Deposited Using a Laser

Sangwoo Yoon, Joohan Kim,윤상우, 김주한
DOI: https://doi.org/10.7736/JKSPE.022.137

3. p.275 SEM Image Quality Improvement and MTF Measurement Technique for Image Quality Evaluation Using Convolutional Neural Network

Chan Ki Kim, Eung Chang Lee, Joong Bae Kim, Jinsung Rho,김찬기, 이응창, 김중배, 노진성
DOI: https://doi.org/10.7736/JKSPE.023.003

4. p.283 Development of Passive Upper Limb Exoskeleton Device (H-Frame) for Augment the Load Carrying Capability of the Human

Dong-Hyun Jeong, Do Yeon Kang, Ji Seck Lee,정동현, 강도연, 이지석
DOI: https://doi.org/10.7736/JKSPE.022.113

5. p.291 Laser Micro-Structuring of Super-Hydrophobic Surface for Lotus Effect

Chang Jun Lee, Hun Kook Choi, Ik Bu Sohn, Jun Seok Ha,이창준, 최훈국, 손익부, 하준석
DOI: https://doi.org/10.7736/JKSPE.022.123

6. p.301 A Recurrent Neural Network for 3D Joint Angle Estimation based on Six-axis IMUs but without a Magnetometer

Chang June Lee, Woo Jae Kim, Jung Keun Lee,이창준, 김우재, 이정근
DOI: https://doi.org/10.7736/JKSPE.022.112

7. p.309 Control Characteristics of a Mechanically Driven Gas Pressure Controller for a Closed Pneumatic Circuit

Cheongyong Park, Wukchul Joung,박청용, 정욱철
DOI: https://doi.org/10.7736/JKSPE.022.125

8. p.319 Realization and Scheduling of Free Spot Assembly Method for Machine Tools Using Cooperative Industrial Robots

Kosuke Inoue, Hideki Aoyama
DOI: https://doi.org/10.7736/JKSPE.022.130

9. p.329 Control Performance Improvement of a Nonlinear Magnetic Levitation System with a Disturbance Observer

Yupeng Zheng, Hyeong-Joon Ahn,정우봉, 안형준
DOI: https://doi.org/10.7736/JKSPE.022.133

10. p.335 Resistant Characteristics of AAO-Based Thin Film Solid Oxide Fuel Cells Using Ni-GDC Anode by GLAD Method

Jaewon Yoo, Myung Seok Lee, Yang Jae Kim, Suk Won Cha,유재원, 이명석, 김양재, 차석원
DOI: https://doi.org/10.7736/JKSPE.022.135

사단법인 한국정밀공학회
(04508) 서울시 중구 중림로 50-1, 12층(만리동 SKY1004빌딩)
SKY 1004 Bldg. 12F, 50-1, Jungnim-ro, Jung-gu, Seoul, Republic of Korea
TEL +82-2-518-2928 l Fax +82-2-518-2937 l E-mail paper@kspe.or.kr
ⓒ Copyright 2001 by KSPE. All Rights Reserved