HOME > Browse Articles > Archive

Archive

Journal of the Korean Society for Precision Engineering - Vol. 39 , No. 7

[Go to Volume List] [Full Issue PDF]

1. p.461 Analysis of Rapid Heating Performance in Multi-Layered Injection Mold System for CNT Surface Heating Element Application

Hyeon Min Lee, Young Bae Ko, Woo Chun Choi,이현민, 고영배, 최우천
DOI: https://doi.org/10.7736/JKSPE.022.057

2. p.469 A Study on Conformal Heating of Curved Mold Using CNT Film Heater

Seo-Hyeon Oh, Eun-Ji Jeon, Hyeon-Min Lee, Yeong-Bae Ko, Keun Park,오서현, 전은지, 이현민, 고영배, 박근
DOI: https://doi.org/10.7736/JKSPE.022.056

3. p.477 Design of Cooling Module with CO₂ for Rapid Cooling of Injection Mold

Hyung Sup Bae, Dong Hyun Park, Ho Sang Lee,배형섭, 박동현, 이호상
DOI: https://doi.org/10.7736/JKSPE.022.050

4. p.485 Energy Saving of Rubber Forming by Direct Heating Press Mold Development

Young Tae Cho,조영태
DOI: https://doi.org/10.7736/JKSPE.022.049

5. p.493 A Study on the Heat Transfer Characteristics of a Glass Lens Mold Heating Block according to Design of a Heat Radiating Block

Bo Min Seo, Dong Yean Jung, Keun Park, Chang Yong Park,서보민, 정동연, 박근, 박창용
DOI: https://doi.org/10.7736/JKSPE.022.058

6. p.501 Fabrication of Nanopatterned Metal Mold based on Zirconia Nanoparticle and its Application into Thermal Replication of Thermoplastic Materials

Selim Park, Kyoung Chan Min, Sowon Jang, Yujin Ha, Wook-Bae Kim,박세림, 민경찬, 장소원, 하유진, 김욱배
DOI: https://doi.org/10.7736/JKSPE.022.059

7. p.509 A Study on Sound Source Localization of Survivors for the Robot Searching Victims in a Narrow Space

Sang-Won Han, Sung-Jae Kim, Dong-Gwan Shin, Ju-Hyun Pyo, Meung-Suk Lee, Maolin Jin, Jin-Ho Suh,한상원, 김성재, 신동관, 표주현, 이명석, 김무림, 서진호
DOI: https://doi.org/10.7736/JKSPE.022.019

8. p.517 Kinematic Calibration based on Position of Robot Manipulator Eliminating Redundancy of Parameters

Jong Hoon Park, Won Bo Jang, Seong Youb Chung, Maolin Jin, Myun Joong Hwang,박종훈, 장원보, 정성엽, 김무림, 황면중
DOI: https://doi.org/10.7736/JKSPE.022.023

9. p.529 Impact Safety Prediction of Automotive Reinforcement Seat Belt Parts for 590 MPa Grade Materials by Using Computer Simulation

Kee Joo Kim, Jae-Woong Lee,김기주, 이재웅
DOI: https://doi.org/10.7736/JKSPE.022.035

10. p.537 Cycle Time Estimation of Block Overlap Based CNC

Chan-Young Lee, Seung-Kook Ro, Chang Kyu Song, Jeong Seok Oh,이찬영, 노승국, 송창규, 오정석
DOI: https://doi.org/10.7736/JKSPE.022.027

사단법인 한국정밀공학회
(04508) 서울시 중구 중림로 50-1, 12층(만리동 SKY1004빌딩)
SKY 1004 Bldg. 12F, 50-1, Jungnim-ro, Jung-gu, Seoul, Republic of Korea
TEL +82-2-518-2928 l Fax +82-2-518-2937 l E-mail paper@kspe.or.kr
ⓒ Copyright 2001 by KSPE. All Rights Reserved