HOME > Browse Articles > Archive

Code of Ethics

Journal of the Korean Society for Precision Engineering - Vol. 39 , No. 9

[Go to Volume List] [Full Issue PDF]

1. p.639 Effect on Mobility and Flexibility of Lumbar Spine Using the Vibration Stimulation-based Inversion Table

Jung Hun Park, Mi Yu, Chul Un Hong, Tae Kyu Kwon,박정훈, 유미, 홍철운, 권대규
DOI: https://doi.org/10.7736/JKSPE.022.082

2. p.647 Evaluation of Lower Extremity Motor Impairment in Post-Stroke Hemiplegic Patients Using Neuromuscular Response during Gait

Heesu Park, Sungmin Han, Joohwan Sung, Soree Hwang, Seung-Jong Kim, Inchan Youn,박희수, 한성민, 성주환, 황소리, 김승종, 윤인찬
DOI: https://doi.org/10.7736/JKSPE.022.074

3. p.657 Development of Gait Measurement System Combined with IMU and Loadcell Insole: A Pilot Study

Jeong-Woo Seo, Junggil Kim, Seulgi Lee, Gyerae Tack, Jin-Seung Choi,서정우, 김정길, 이슬기, 탁계래, 최진승
DOI: https://doi.org/10.7736/JKSPE.022.073

4. p.663 Finite Element Analysis of the Difference of Bone-Conducted Responses according to the Young’s Modulus of Skull

Jongwoo Lim, Soomin Lee, Namkeun Kim,임종우, 이수민, 김남근
DOI: https://doi.org/10.7736/JKSPE.022.078

5. p.669 Modeling and Simulation of Finger Prosthetic for Patients with Partial Amputation

Hyunho Kim, Quoc Viet Luong, Jai-Hyuk Hwang, Handdeut Chang, Yeongjin Kim,김현호, 루엥비엣, 황재혁, 장한뜻, 김영진
DOI: https://doi.org/10.7736/JKSPE.022.067

6. p.675 Effect of Slurry Film Thickness Variation according to Spray Range Using Ultrasonic Spray Nozzle on Material Removal Rate

Seongnyeong Heo, Seonho Jeong, Minji Kim, Youngwook Park, Haedo Jeong,허성녕, 정선호, 김민지, 박영욱, 정해도
DOI: https://doi.org/10.7736/JKSPE.022.036

7. p.683 A Study on the Improvement of Bonding Strength of Heterojunctions by Applying Laser Surface Treatment to Carbon Fiber Reinforced Plastics

Huan Wang, Seong Cheol Woo, Chung-Ki Sim, Seong-Kyun Cheong, Joohan Kim,왕환, 우성철, 심충기, 정성균, 김주한
DOI: https://doi.org/10.7736/JKSPE.022.063

8. p.691 Temperature and Strain Rate Controls of AISI 4340 based on a 3D Processing Map in a Hot Forging Process

Joon Hee Park, Dong Hwi Park, Sang Yun Shin, Naksoo Kim,박준희, 박동휘, 신상윤, 김낙수
DOI: https://doi.org/10.7736/JKSPE.022.071

9. p.701 Register Marks Position Measurement System to Numerically Evaluate the Fidelity of Engraved Pattern Position in a Printing Roll

Sung Min Lee, Jong Su Lee, Hyung Sun Kim, Jong Guen Choi,이성민, 이종수, 김형선, 최종근
DOI: https://doi.org/10.7736/JKSPE.022.022

10. p.711 Study on Improvement of Catheter Tip Forming Process according to Plating Characteristics in Mold

Han Chang Lee, Jinhyuk Jung, Gyu Ik Lee, Woojin Kim, Gyu Man Kim, Bong Gu Lee,이한창, 정진혁, 이규익, 김우진, 김규만, 이봉구
DOI: https://doi.org/10.7736/JKSPE.022.065

사단법인 한국정밀공학회
(04508) 서울시 중구 중림로 50-1, 12층(만리동 SKY1004빌딩)
SKY 1004 Bldg. 12F, 50-1, Jungnim-ro, Jung-gu, Seoul, Republic of Korea
TEL +82-2-518-2928 l Fax +82-2-518-2937 l E-mail paper@kspe.or.kr
ⓒ Copyright 2001 by KSPE. All Rights Reserved