HOME > Editorial Committe > Operationg Rules

  • ENG
  • KOR

Operating Rules for Editorial Committee

Enacted October 7, 2011
Amended April 10, 2015

Article 1 Purpose
The rules are designed to specify matters related to the operation of the Editorial Committee for Journal of the Korean Society for Precision Engineering (hereinafter referred to as the “Journal”), which is created according to Article 43 Clause 1 of the Enforcement Regulations of the Articles of the Korean Society for Precision Engineering (hereinafter referred to as the “Society”).

Article 2 Organization
A. The Committee is composed of an Editor-in-Chief as Chairman and a few members appointed by the President as recommended by the Editor-in-Chief.
B. The Editor-in-Chief is appointed by the President as recommended by the Board of Directors.
C. The Editor is appointed by the President as recommended by the Editor-in-Chief.
D. If needed, one of the Editors may be appointed the Vice Editor-in-Chief.

Article 3 Tasks
The Committee conducts duties related to the planning, editing, and publication of the Journal, reviewing papers, and the development of the Journal, for which the regular Committee is held.

Article 4 Editor-in-Chief’s Duties
A. The Editor-in-Chief represents the Committee and assumes general responsibility for tasks such as the planning, editing, and publication of the Journal, paper review, and the development of the Journal.
B. According to Article 3 of the Rules, the Editor-in-Chief convenes the Committee regularly and presides over it.
C. The Editor-in-Chief reports matters requiring important decisions to the Board of Directors.

Article 5 Editor’s Duties
A. The Editor conducts the planning, editing, and publication of the Journal, reviewing papers, and the development of the Journal and serves as those in charge of the procedures for paper review.
B. The Editor participates in the regular Committee as specified in Article 3 of the rules and deliberates and discusses the tasks related to the editing and publication of the Journal.

Article 6 Term of Office
A. The Editor-in-Chief‘s term of office is 5 years with possible extensions.
B. The Editor’s term of office is 1 year with possible extensions.
C. The Editor’s year of service is from January 1 through December 31.

Addendum
The Rules go into force as of October 7, 2011.

Addendum
The Rules go into force as of April 10, 2015.

편집운영위원회 운영규정

제정 2011년 10월 7일
일부개정 2015년 4월 10일
일부개정 2018년 9월 14일

제1조(목적)
이 규정은 사단법인 한국정밀공학회(이하‘학회’라 한다) 정관시행규칙 제43조 제1항에 따라 설치 되는 한국정밀공학회의 국문학술지(한국정밀공학회지, 이하‘학회지’라 한다) 편집운영위원회 운영 에 관한 사항을 규정함을 목적으로 한다.

제2조(구성)
① 본 위원회는 위원장인 학회지 편집장(Editor-in-Chief)과 학회지 편집장의 추천에 의해 회장이 임명하는 학회지 편집인(Editor)과 학회지 편집위원(Editorial Board)으로 구성한다.
② 학회지 편집장은 이사회의 추천에 의해 회장이 임명한다.
③ 학회지 편집인 및 학회지 편집위원은 학회지 편집장의 추천에 의해 학회지 편집운영위원회의 심의를 거쳐서 회장이 임명한다.
④ 필요에 따라 학회지 편집인 중 1인을 학회지 부편집장(Vice Editor-in-Chief)으로 선임할 수 있다.

제3조(업무)
본 위원회는 학회지의 기획, 편집, 논문심사, 출판 및 학회지 발전에 관한 업무를 수행하며, 이를 위해 정기 회의를 개최한다.

제 4 조(학회지 편집장의 직무)
① 학회지 편집장은 위원회를 대표하고, 학회지의 기획, 편집, 논문심사, 출판 및 학회지 발전에 관한 업무를 총괄한다.
② 본 규정 제3조에 의거 정기적으로 회의를 소집하며, 그 회의를 주재한다.
③ 중요 결정사항은 이사회에 보고한다.

제 5 조(학회지 편집인 및 학회지 편집위원의 직무)
① 학회지 편집인은 학회지의 기획, 편집, 논문심사, 출판, 학회지 발전에 관한 업무 및 논문 심사과정의 운영 책임자 역할을 수행한다.
② 학회지 편집위원은 학회지의 논문심사, 출판, 학회지 발전에 관한 업무 및 논문 심사과정의 운영의 역할을 수행한다.
③ 본 규정 제3조의 정기 회의에 참가하여 학회지 편집 및 출판에 관한 업무를 심의·협의한다.

제6조(임기)
① 학회지 편집장과 부편집장의 임기는 5년으로 하며 연임이 가능하다.
② 학회지 편집인 및 학회지 편집위원의 임기는 1년으로 하며 연임이 가능하다.
③ 학회지 편집인 및 학회지 편집위원의 위촉년도는 1월 1일부터 12월 31일까지로 한다.