Code of Ethics

Journal of the Korean Society for Precision Engineering - Vol. 36 , No. 9

[Go to Volume List] [Full Issue PDF]

1. p.783 Micro Machining of CFRP Using Nanosecond Pulsed Fiber Laser

Do Kwan Chung, Jin Sung Park, Ki Hun Kim
DOI: https://doi.org/10.7736/KSPE.2019.36.9.783

2. p.793 Multi-Criteria Decision Making Using Preferential Selection Index in Titanium based Die-Sinking PMEDM

Nguyen Huu-Phan, Banh Tien-Long, Le Quang-Dung, Nguyen Duc-Toan, T. Muthuramalingam
DOI: https://doi.org/10.7736/KSPE.2019.36.9.793

3. p.803 Study on Cutting Force and Chip Shrinkage Coefficient during Thermal : Assisted Machining by Induction Heating of SKD11 Steel

Thi-Bich Mac, Tien-Long Banh, Duc-Toan Nguyen
DOI: https://doi.org/10.7736/KSPE.2019.36.9.803

4. p.813 A Study on Partitioning Freeform Surface and Tool Selection Method for 3-Axes CNC Machining

Bui Ngoc Tuyen, Hoang Van Quy, Duc-Toan Nguyen
DOI: https://doi.org/10.7736/KSPE.2019.36.9.813

5. p.821 Integrated Analytical Approach for the Definition and the Control of the Radial-Axial Ring Rolling Process

Do yeon Kim, Luca Quagliato
DOI: https://doi.org/10.7736/KSPE.2019.36.9.821

6. p.837 A Study on Scattering Signal Analysis based on Angle Changes of Tapered Defect using Guided Waves

Jaesun Lee
DOI: https://doi.org/10.7736/KSPE.2019.36.9.837

7. p.843 Improvement of Measuring Stability of Amplitude Attenuation by the Bubble in Ultrasonic Flow-Meter for Semiconductor Process

Il Jin Bae, Eung Suk Lee
DOI: https://doi.org/10.7736/KSPE.2019.36.9.843

8. p.851 Extended Kalman Filter Based 3D Localization Method for Outdoor Mobile Robots

Woo Seok Lee, Min Ho Choi, Jong Hwan Lim
DOI: https://doi.org/10.7736/KSPE.2019.36.9.851

9. p.859 A Study on Optimal Cutting Condition of EPS Foam Cutting Based on Collimated CO₂ Laser Beam

Hakmin Kim, Joonhyeok Sim, Sangyeol Jeong, Daehie Hong
DOI: https://doi.org/10.7736/KSPE.2019.36.9.859

10. p.867 Study on the Reduction of Gear Whine Noise in Diesel Engine Gear Train

Qi Zhang, Yong Bo Wang, Jian Hua Lv, Zhong Gang Zhu, Zhen Qin, Sung Ki Lyu
DOI: https://doi.org/10.7736/KSPE.2019.36.9.867

11. p.875 Environmental Impact Evaluation on Lightweight Structure Design of a Composite Ship by LCA (Life Cycle Assessment)

Daekyun Oh, Dongkun Lee, Sookhyun Jeong
DOI: https://doi.org/10.7736/KSPE.2019.36.9.875

12. p.883 Application/Comparison Study of a Graphical Method of Forming Limit Curve Estimation for DP590 Steel Sheets

The-Thanh Luyen, Quoc-Tuan Pham, Young-Suk Kim, Duc-Toan Nguyen
DOI: https://doi.org/10.7736/KSPE.2019.36.9.883

13. p.891 Effect of Technological and Geometrical Parameters on Formation of Radius Region at Cylindrical Product Bottom in Hydrostatic Forming

Nguyen Thi Thu, Nguyen Dac Trung
DOI: https://doi.org/10.7736/KSPE.2019.36.9.891

14. p.901 Development of a Portable Fluorescent Detection Device for Microalgae

Dongju Chang, Young Hak Cho, Chibum Lee
DOI: https://doi.org/10.7736/KSPE.2019.36.9.901

사단법인 한국정밀공학회
(04508) 서울시 중구 중림로 50-1, 12층(만리동 SKY1004빌딩)
SKY 1004 Bldg. 12F, 50-1, Jungnim-ro, Jung-gu, Seoul, Republic of Korea
TEL +82-2-518-2928 l Fax +82-2-518-2937 l E-mail paper@kspe.or.kr
ⓒ Copyright 2001 by KSPE. All Rights Reserved