Archive

Journal of the Korean Society for Precision Engineering - Vol. 39 , No. 2

1. p.91 Co-Sputtered Pt-Ru Catalytic Functional Layer for Direct-Methane Fueled Low Temperature Solid Oxide Fuel Cells

Hyong June Kim, Byung Chan Yang, Jaehyeong Lee, Sung Eun Jo, Geonwoo Park, Sanghoon Ji, Jihwan An
DOI: https://doi.org/10.7736/JKSPE.021.119

2. p.97 Cathodic Functional Layer via Sputtering and Atomic Layer Deposition for Thin-Film Solid Oxide Fuel Cells

Jaeyoon Lee, Sanghyeok Lee, Hyeontaek Kim, Yongchan Park, Geunjin Lee, Changheon Lee, Sunggyu Choi, Soonwook Hong
DOI: https://doi.org/10.7736/JKSPE.021.123

3. p.103 Ultra-Fast Fabrication of YSZ Electrolyte via Flash Light Sintering with ESB Sintering Aid for Solid Oxide Fuel Cells

Yonghyun Lim, Young-Beom Kim
DOI: https://doi.org/10.7736/JKSPE.021.120

4. p.109 Effects of Current Collecting Methods for Polymer Bipolar Plate of Ultra-Light Polymer Electrolyte Membrane Fuel Cells

Gye Eun Jang, Young Jo Lee, Gu Young Cho
DOI: https://doi.org/10.7736/JKSPE.021.118

5. p.115 A Study on the Excitation Force Identification of a Multi-Input System Using Inverse Stiffness Method

Jun-heon Lee, Kwanju Kim
DOI: https://doi.org/10.7736/JKSPE.021.106

6. p.123 A Study on the Efficient Optimization of Controller for Magnetic Bearings Supporting Oil-Free Turbo-Chiller Compressor

Eunsang Kwon, Myounggyu Noh, Namsoo Lee, Seongki Baek, Young-Woo Park
DOI: https://doi.org/10.7736/JKSPE.021.087

7. p.131 Input Signal Transformation Based Control Assistant System for UAV Moving Target Tracking and Landing Performance Improvement

Junsoo Baek, Junyoung Kwak, Baeksuk Chu
DOI: https://doi.org/10.7736/JKSPE.021.090

8. p.143 Moving Object Position Estimation Algorithm Using Reflected Beam Intensity of Retro-Reflector and LiDAR

Jung-Seok Seo, Ju-Hyeon Park, Gye-Jo Jung
DOI: https://doi.org/10.7736/JKSPE.021.102

9. p.151 Analysis of the Cylindrical Flexure Hinges with Circular Notches

Jun-Hee Moon
DOI: https://doi.org/10.7736/JKSPE.021.112

10. p.159 Analysis of Correlation between FDM Additive and Finishing Process Conditions in FDM Additive-Finishing Integrated Process for the Improved Surface Quality of FDM Prints

Ji Won Yu, Hyung Jin Jeong, Jae Hyung Park, Dong Hun Lee
DOI: https://doi.org/10.7736/JKSPE.021.114

사단법인 한국정밀공학회
(04508) 서울시 중구 중림로 50-1, 12층(만리동 SKY1004빌딩)
SKY 1004 Bldg. 12F, 50-1, Jungnim-ro, Jung-gu, Seoul, Republic of Korea
TEL +82-2-518-2928 l Fax +82-2-518-2937 l E-mail paper@kspe.or.kr
ⓒ Copyright 2001 by KSPE. All Rights Reserved