저널 아카이브

Journal of the Korean Society for Precision Engineering - Vol. 40 , No. 1

[Go to Volume List] [Full Issue PDF]

1. p.13 Optimal Design of Microwave Shielding Door by Using of Design of Experiments

Ka Hee Lee, Kwang Kim
DOI: https://doi.org/10.7736/JKSPE.022.104

2. p.21 Prediction of CMP Material Removal Rate based on Pad Surface Roughness Using Deep Neural Network

Jong Min Jeong, Seon Ho Jeong, Yeong Il Shin, Young Wook Park, Hae Do Jeong
DOI: https://doi.org/10.7736/JKSPE.022.119

3. p.31 Real-Time Machine Vision-Based Inspection Method for Automotive Crash-Pad’s Stitch

Hyun Joong Yoon, Jin Gon Kim
DOI: https://doi.org/10.7736/JKSPE.022.092

4. p.39 Analysis of Acoustic Emission (AE) Signal Characteristics of the Magnesium Alloy Sheet (AZ31B) in the Tensile Deformation

Yong Ho Song, So Chan An, Jae Hyeong Yu, Wan-Jin Chung, Chang-Whan Lee
DOI: https://doi.org/10.7736/JKSPE.022.091

5. p.49 A Study on the Prediction Model of the Radius of Curvature of the Subtle Feature of the Automotive Parts for Different Forming Conditions

Jae-Hyeong Yu, Kyu-Seok Jung, Yunchan Chung, Chang-Whan Lee
DOI: https://doi.org/10.7736/JKSPE.022.101

6. p.57 Development of Steering Stop Parts for Automobile Suspension Using Former Cold Forging Complex Forming Technology

Dong-Hwan Park, Seong-Chul Han, Seung-Ho Han, Hyuk-Hong Kwon
DOI: https://doi.org/10.7736/JKSPE.022.079

7. p.65 Distortion Compensation Algorithm for a Cable-Driven Master Device

Jinsu Park, Gyoungjun Lee, Yeri Sim, Sangrok Jin
DOI: https://doi.org/10.7736/JKSPE.022.086

8. p.71 Evaluation of Thin-Shell Properties of Self-Healing Microcapsules by Reinforcement of Carbon Nanotubes

Jeong Keun Jang, Hyeon Ji Kim, Sung Ho Yoon
DOI: https://doi.org/10.7736/JKSPE.022.089

9. p.79 Dynamic Analysis and Mathematical Modeling of a Gas Cutting Process

Jae-In Lee, Byeong-Soo Go, Jun-Yeop Lee, In-Keun Yu, Il-Woo Moon, Do-Young Moon, Minwon Park
DOI: https://doi.org/10.7736/JKSPE.022.090

10. p.87 A Study on the Estimation of Geometric Errors for Rotary Axes of a Five-Axis Machine Tool Using a Cross-Shaped Calibration Artifact

Jeongmo Kang, Dayoung Kim, Sungchul Jee
DOI: https://doi.org/10.7736/JKSPE.022.102

사단법인 한국정밀공학회
(04508) 서울시 중구 중림로 50-1, 12층(만리동 SKY1004빌딩)
SKY 1004 Bldg. 12F, 50-1, Jungnim-ro, Jung-gu, Seoul, Republic of Korea
TEL +82-2-518-2928 l Fax +82-2-518-2937 l E-mail paper@kspe.or.kr
ⓒ Copyright 2001 by KSPE. All Rights Reserved