Archive

Journal of the Korean Society for Precision Engineering - Vol. 36 , No. 2

[Go to Volume List] [Full Issue PDF]

1. p.115 Analysis of Temperature Variation by Structural Arrangement of Internal Heat Sources in Radar Shelters

Seongyong Kim, Changwoo Lee
DOI: https://doi.org/10.7736/KSPE.2019.36.2.115

2. p.121 A Study on the Optimal Design of Drive Gear for Transfer Gearbox

MyeongJin Song, MyeongHo Kim, Zhen Qin, DongSeon Kim, NamSool Jeon, SungKi Lyu
DOI: https://doi.org/10.7736/KSPE.2019.36.2.121

3. p.127 A Study on the Shape Optimization and Structural Analysis of Turret Center for Powder Metallurgy Material Machining before Sintering

Choon-Man Lee, Ho-In Jeong, Eun-Jung Kim, Sung-Woo Shin
DOI: https://doi.org/10.7736/KSPE.2019.36.2.127

4. p.135 A Basic Study on Structural Analysis and Improvement of Pressurized DC (Dust Cake) Filter System Using Hydraulic Cylinder

Choon-Man Lee, Yea Jin Yang
DOI: https://doi.org/10.7736/KSPE.2019.36.2.135

5. p.141 A Study on the End Mill Shape Design for Machining of High Hardness Die Steels by Comparison of Cutting Force

Ju Ho Lee, Young Tae Cho
DOI: https://doi.org/10.7736/KSPE.2019.36.2.141

6. p.149 Improvement of Electrolyte Layer Coating Quality Using Statistical Optimization

Seongyong Kim, Changwoo Lee
DOI: https://doi.org/10.7736/KSPE.2019.36.2.149

7. p.155 Influence of Shape Rolling on the Side Profile During Horizontal Rolling Process of Reed Wire Using LS-DYNA

Se Jong Kim, Jin Ho Kim
DOI: https://doi.org/10.7736/KSPE.2019.36.2.155

8. p.163 Study on the Deburring of Intersecting Holes with Abrasive Flow Machining

Joon Kyu Beom, Young Gwan Kim, Kwang Joon Kim, Kwon Hee Kim
DOI: https://doi.org/10.7736/KSPE.2019.36.2.163

9. p.169 Effect of Vibration and Machining Area in the Fabrication of Micro Tool by Reverse EDM

Yung Na, Bo Hyun Kim
DOI: https://doi.org/10.7736/KSPE.2019.36.2.169

10. p.177 Finite Element Analysis on Dynamic Viscoelasticity of CMP Polishing Pad

Byeongjun Pak, Dasol Lee, Seonho Jeong, Hyunjin Kim, Haedo Jeong
DOI: https://doi.org/10.7736/KSPE.2019.36.2.177

11. p.183 Unscented Kalman Filter based Outdoor Localization of a Mobile Robot

Woo Seok Lee, Jong Hwan Lim
DOI: https://doi.org/10.7736/KSPE.2019.36.2.183

12. p.191 A Study on the Development of Smart Factory Equipment Engineering System and Effects

Hyun Sik Sim
DOI: https://doi.org/10.7736/KSPE.2019.36.2.191

13. p.199 A Study on the Design of Rotor for 10 kWh Flywheel Energy Storage System

Beom Soo Kang, Deuk Kyu Lee
DOI: https://doi.org/10.7736/KSPE.2019.36.2.199

14. p.209 Optimization of the Ball Circulation System for Improving the Ball Screw Performance

Chae Yoon Yang, Seong Gil Han, Bo Kyun Kim, Jong Heun Park, Chul Ki Song
DOI: https://doi.org/10.7736/KSPE.2019.36.2.209

사단법인 한국정밀공학회
(04508) 서울시 중구 중림로 50-1, 12층(만리동 SKY1004빌딩)
SKY 1004 Bldg. 12F, 50-1, Jungnim-ro, Jung-gu, Seoul, Republic of Korea
TEL +82-2-518-2928 l Fax +82-2-518-2937 l E-mail paper@kspe.or.kr
ⓒ Copyright 2001 by KSPE. All Rights Reserved